top of page
Gliss Kit

Gliss Kit

$49.99Price
CarPro Gliss Kit: The Next Generation Hyper Slick Top Coat

  • CarPro Gliss Kit: The Next Generation Hyper Slick Top Coat

    Make your own bliss… Slide through gloss into GLISS!

    If I were to ask you what two factors fill every true car care enthusiast with happiness, what would you say?  For most it is the gloss and incredible feeling of a perfect slick smooth and pure finish!  THAT is the essence of GLISS…

    With GLISS, CarPro brought new advances in nanotechnology to bare and designed an all-new hyper-smooth, hyper-glossy, and easy to apply ceramic nano coating that excels as a top-coat for all CQuartz coatings!

    Utilizing modified long chain carbon fluorine polymers and enhanced nano-technology, GLISS provides increased resistance to, static buildup, dust retention, and many types of mineral and water stains!

    This incredible next-gen coating serves multiple purposes and even excels as a stand-alone paint protection and enhancement system with a HYPER slick surface that will make your jaw drop!

    Features:

    • Hyper SLICK and smooth
    • Next Generation Top Coat!
    • Also works great as a stand-alone Nano-coat!
    • Anti-static: Non-oily / resists dust retention
    • Adds thickness to your existing coat when used as a top coat
    • Enhances resistance to water spots and mineral stains
    • Extreme Hydrophobic effect
    • Enhances Gloss and life of any ceramic coating

    DIRECTIONS:

    Surface must be very dry per coating.

    Drag one line of product across length of suede wrapped applicator.

    Apply evenly across surface

    Approximately 24” Sq (60cm2) at a time.

    Add more product to applicator as needed to keep a wet, even

    application.

    Wait until white haze forms and immediately wipe all residues off using a microfiber.

    If haze is left on too long then reapply and immediately wipe off.

    If layering on top of itself, wait 1 hour between coats. If IR cured may repeat immediately.

    Total cure time: 12 hours.

    Tips for use as top coat on CQuartz:

    May be applied 4 hours or longer after CQuartz.

    If CQuartz was IR cured then only 1 hour is needed.

    GLISS may flash slightly faster when applied over CQuartz.

    Maintenance: Wash regularly with CarPro Reset or Ech2o.

    Durability: 6-12 Months.

    Storage : 15~ 35 deg.C ( 60 ~ 95 F.)

    Important! If product is stored below this temp and becomes gel then it must be warmed up to reactivate.

bottom of page